Sailing yachts
Full specification
Classic Yacht Brokerage Comments on this Gaffers & Luggers Lug Yawl Tosher
20’ Mevagissey Tosher built by the Gaffers & Luggers yard, Falmouth in 2003.
The Gaffers & Luggers yard produced traditionally designed working boats built in GRP, all the appearance of a traditional boat with a very traditional design taken from one of the local Mevagissey Tosher working boats. The 20’ Tosher was the second smallest design in their range, large enough to be capable and safe but small enough to sail single handed and keep running costs down.
Many of these boats were rigged as gaff cutters, however this boat is unusual with her elegant lug yawl rig making her very fast and striking to look at.
A large open cockpit gives plenty of space, but she also has a cosy cabin up forward under the raised deck offering a single berth, heads and small galley space. This set up makes her suitable for single handed coastal exploring with a boat that can be easily handled, fairly shallow draft and space to stay overnight in comfort.
Described by Watercraft Magazine after sea trials as “simple to rig, sea kindly, roomy and comfortable but with a good turn of speed.”
Length on Deck 20’ / 6.1m
Length Waterline 19’6” / 5.9m
Beam 7’2” / 2.1m
Draft 3’6” / 1.0m
Accommodation
Berths and headroom
1 berth with sitting headroom.
General Description
Small accommodation space under the raised foredeck.
Sliding iroko companion hatch into the accommodation space. Small seat on the starboard side and a single berth to port that stretches aft under the cockpit seating.
Heads
Blakes Lavac sea toilet mounted on the centreline under the joinery. Discharges directly overboard.
Galley
Origo 1500 single burner spirit stove mounted on the starboard side. Wooden box to to cover the stove when not in use.
Rig
Spars
Balanced lug yawl rig on keel stepped varnished pine masts.
Varnished pine lug yard, boom and mizzen spars.
Standing lug mizzen sail.
Standing and Running Rigging
Traditional 3 strand running rigging and varnished wooden blocks.
Lazy jacks on the mainsail to aid sail handling.
Mainsheet to a stainless steel horse on varnished iroko posts bonded through to the bilges for strength.
Sails
Lug mainsail and mizzen in tan duradon cloth.
Mainsail: fully battened 238sqft
Mizzen: 32sqft
Mainsail and mizzen sail cover.
Winches
Pair of Harken 6 non-ST winches on the coachroof deck.
Machinery and systems
Engine
Yanmar 1GM10 diesel engine installed in 2003.
Centreline 2 blade bronze propeller.
Tanks
42 litre Vetus plastic fuel tank in the bilge with water separator filter.
Batteries and Electrics
12 volt battery charged from the engine alternator.
Construction
GRP moulded hull. Copper Coat finish underwater.
Encapsulated ballast keel plus internal lead trimming ballast.
Varnished iroko rubbing strakes and capping rails. Bronze fairleads and cleats. Stainless steel stemhead fitting.
Transom hung GRP rudder on bronze hangings.
GRP decks. Foredeck well finished in straight laid varnished iroko planking over the GRP subdeck.
Varnished iroko coamings around the cockpit.
Painted marine plywood sole boards. The centre boards all lift out separately to access the bilge.
Cockpit thwarts either side at the forward end in moulded GRP. The port side thwart is fixed allowing space below for the single berth. Starboard side thwart lifts to give a large locker beneath.
Equipment
Steering compass
Clipper Duet log and sounder
Manual bilge pump
Auto electric bilge pump
Mooring warps
9 x fenders
2 x boathooks
Fitted cockpit cover by Covercare
Heavy duty mast-up winter cover
Bruce anchor with chain and warp
CQR kedge anchor
Classic Yacht Brokerage have an extensive database of boats for sale. With a wide range of sailboats, classic yachts and motor yachts, Classic Yacht Brokerage has one of the largest selections of modern classic boats for sale in the UK.
Disclaimer:
These particulars have been prepared in good faith from information provided by the Vendors and are intended as a guide, Classic Yacht Brokerage cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. The Purchaser should instruct his agent or surveyor to validate all details as necessary and satisfy himself with the condition of the vessel and its equipment.











